Brian E. Brzezicki
Copyright 2018
Version 1.00 01/05/2018

Disclaimer
Use this at your OWN risk, do NOT sue me if it breaks your board... if your doing this your board is probably already broken though ;)

Game Board #1 01/05/2018

Problem:

    Game does not boot, getting error #RAM 1, customer sent it in because acceleration does not work.

Troubleshooting/dianosis steps:

  1. Getting "RAM 1" error
  2. Replaced 2114 @ 7F on video board
  3. Now getting "RAM 3" error
  4. Replaced 2114 @ 7H on video board
  5. Now getting "RAM 23" error
  6. Replaced 2114 @ 7J on video board
  7. Now getting "RAM 27" error
  8. Replaced 2114 @ 7K on video board
  9. Now getting "RAM 2" error
  10. Replaced 2114 @ 8H on video board
  11. Game now boots, however accleration does not work
  12. I don't have a pole position cabinet so I tested by placing 2 resistors together like
    +5v ----=1K resistor=----*----=4K resistor---- GND
    And place a wire in between the two resistors (*) into edge connector pin "F" on the main CPU board, was getting just 00 as acceleration in test mode
  13. Replaced ADC0804 @ 8J
  14. Now acceleration works!
  15. Game works